48 bathroom vanity plans pictures

Bathroom Vanity Plans; Guide

Posted on

Bathroom vanity plans may become one of the most important things to cut down your budget in designing a bathroom. You can make your own design for bathroom vanity which is more affordable than buying it. Here we give you some steps in creating vanity that will be very helpful to minimizing your cost. Yet you can still a beautiful vanity to store your towels or any other accessories in the bathroom. This is a very simple step to work in to avoid much cost for your bathroom.

Bathroom Vanity Plans


Firstly, you have to prepare the needed tools:

-tape measure
-speed square
-safety glasses
-kreg jig
-circular saw
-miter saw
-brad nailer


  • Plywood

1 – sheet 3/4″ plywood ripped into 20-1/4″ wide strips
3 – 1×2 @ 8 feet long
1 – 1×6 @ 4 feet long
1 – 1×4 @ 8 feet long
1 – 1×3 @ 12 feet long (for doors)
1/4 sheet of 1/2″ thick plywood (for doors)
9 feet of 1/2″ thick x 3-1/2″ tall boards (for drawer)
1/4 sheet of 1/4″ plywood (for drawer bottoms)

  • Other materials

2 – 16″ euro drawer slides
4 – Non Mortise Hinges
1-1/4″ and 1″ pocket hole screws
1-1/4″ finish nails
knobs and pulls


The whole dimension will be 48’x21’. Firstly, build the basic frame or box for the vanity by using 3/4″ pocket holes and 1-1/4″ pocket hole screws. The pieces are for the two sides, the middle, and the bottom. After that, attach the shelves for the left and the right side and make the middle shelf adjustable. Next, build the face frame with 3/4″ pocket holes and 1-1/4″ pocket hole screws. Attach the face frame with 1-1/4″ finish nails and glue then attach the back supports. For the drawers, you can use dimension 16”x93/4” then attach them with nails and glue. Then finally, install your drawers to the frame. You can spray the vanity with your desired colors. Actually, this is just a simple description of how to create your own vanity plan. For the dimension, you can apply based on your taste, but this description recommends you to get bigger vanity with 6 drawers. You can also have another plan, for example the simpler one with only 1 draws and 2 doors. Any bathroom vanity plans will be good as long as it fits to your bathroom. Give it a try.